• Name : Automatic feeding cutting machine
  • Model : UT1816
Applicable industries: Clothing tailoring, car cushions, foot pads, interior decorations, luggage, shoes, leather goods, toys, trademarks and other processing industries
Suitable for various non-metallic flexible heald materials such as cloth, leather, plush material, synthetic fiber, paper, etc.
 Order Online
Product Tags

Application video

No video for this product

Machine features:
♦ Unique upper and lower smoke exhaust design. Whether breathable or non-breathable on the material cutting process of smoke and dust completely clean, non-breathable material cutting to the production environment caused by pollution will be completely solved,
♦ Stainless steel caterpillar feeding platform, equipped with automatic feeder independently designed by Youtuo (optional); , which can realize the automatic and continuous addition without interruption after setting up
The incision is automatically closed, smooth and without burr, and the processing process does not require any work
♦ meet with intelligent clothing software, material utilization rate is higher ♦ root product demand, can be matched with appropriate double light, processing efficiency can be for high"
♦ Y axis with high help rate motor inch: cut school speed, degree more "optional air purification device, can achieve the processing process of dust purification emissions.
♦ Imported square rail high-speed rail is optional according to customer's processing requirements. ♦ Customized models, including the actual needs of customers,

The machine model


Cutting speed


Laser power

The energy system of artists

6-100% software Settings

Laser type

Letter from type CO? Glass tube light applicator

Control the degree of economic

+ / - 0.01

Cooling type

Forced circulating water cooling

Repeat accuracy

Plus or minus 0. 1

Effective processing area


The power supply voltage

AC220V plus or minus 10% 50/60 hz

Work platform

Nonferrous steel crawler working platform

The total power

< 1600

Graphics Supported Format


Machine heavy star


Engraving speed 囲


The machine size

2700 * 2300 * 1050


  • 1.During the operation of the machine, the operator is strictly prohibited to leave to avoid fire.
  • 2.After each startup, check whether the submersible pump is out of water. It is strictly forbidden to start working without the pump.
  • 3.It is strictly forbidden to start the machine without grounding. The ground wire of the laser power supply must be connected to the ground, and must not be connected to doors, windows, water pipes and other facilities. The ground wire should be connected to the outdoor ground.
  • 4.The water temperature of the water container must be controlled below 25 degrees. If the water temperature is too high, the circulating water should be replaced. It is best to use purified water for circulating water, and ensure that the water is clean and free of impurities. Replace the circulating water regularly.
  • 5.Due to the laser and high voltage parts inside the machine, non-professionals are strictly prohibited from disassembling machine parts without authorization.
  • 6.The fan must be turned on when engraving to avoid contaminating the lens and focusing lens. It is strictly prohibited to place flammable and explosive materials near the equipment to avoid fire.
  • 7.It is strictly prohibited to use during thunderstorms.
  • 8.It is strictly forbidden to plug or unplug the power cord and communication cable when the power is on.
  • 9.During operation, abnormal phenomena such as no light output or collision of the coordinate system are found, and the power supply should be cut off first, and then the machine should be turned on after troubleshooting.
  • 10.The guide rails should be cleaned regularly.
 Order Online
Ordering Product
  • Name:
  • Tel:
  • Email:
  • Company Name:
  • Message Time:
  • Message content:
  • Verification code:Click Refresh verification code