• Name : Automatic feeding cutting machine
  • Model : UT1830/UT1630
Applied industry: Garment cutting, car cushions, foot pads, interior decorations, luggage, shoes, leather goods, toys, trademarks and other processing industries
Applicable materials: cloth, leather, plush material, synthetic fiber, paper and other non-metallic flexible heddle materials
 Order Online
Product Tags

Application video

 Model Features
 unique upper and lower smoke exhaust design, no matter breathable or non-breathable fabric cutting process of smoke and dust are completely eliminated, non-breathable material cutting to the production environment caused by pollution drawbacks completely solved.
 adopts stainless steel caterpillar type feeding platform, equipped with automatic feeding machine independently designed by Youtuo (optional), which can realize non-interrupted automatic continuous processing after typesetting, automatic sealing of incision, smooth and without burr edge, and completely without manual intervention in the processing process.
 Optional intelligent typesetting software, high material utilization rate.
 According to product requirements, can be configured with double-headed laser, processing efficiency can be doubled.
Y axis is driven by high power motor, cutting speed is faster.
 Optional air purification device, can realize the processing process of dust purification emissions.
 According to customer processing needs, can choose imported square rail, high-speed rail.
 Customize models according to customers' actual needs.


Jue: model

1630/1830

Cutting speed

0-40000.

Laser power

150

Can 蛍 control

0-1 OM piece setting

Laser type

Seal - off type such as 2 - glass laser tube

Control precision

+ / - 0.01

- 's

Forced circulating water cooling

The vertical degree of chu

+ / - 0.1



1800-3000.

The power supply voltage

AC22OV + IO! u 50/60H2

Work platform

Stainless steel belt working platform

The total power

< 2000



PLT/ALDXF/BMP/DST^

Machine weight

700



0-60000.

Machine order size

Precautions

  • 1.During the operation of the machine, the operator is strictly prohibited to leave to avoid fire.
  • 2.After each startup, check whether the submersible pump is out of water. It is strictly forbidden to start working without the pump.
  • 3.It is strictly forbidden to start the machine without grounding. The ground wire of the laser power supply must be connected to the ground, and must not be connected to doors, windows, water pipes and other facilities. The ground wire should be connected to the outdoor ground.
  • 4.The water temperature of the water container must be controlled below 25 degrees. If the water temperature is too high, the circulating water should be replaced. It is best to use purified water for circulating water, and ensure that the water is clean and free of impurities. Replace the circulating water regularly.
  • 5.Due to the laser and high voltage parts inside the machine, non-professionals are strictly prohibited from disassembling machine parts without authorization.
  • 6.The fan must be turned on when engraving to avoid contaminating the lens and focusing lens. It is strictly prohibited to place flammable and explosive materials near the equipment to avoid fire.
  • 7.It is strictly prohibited to use during thunderstorms.
  • 8.It is strictly forbidden to plug or unplug the power cord and communication cable when the power is on.
  • 9.During operation, abnormal phenomena such as no light output or collision of the coordinate system are found, and the power supply should be cut off first, and then the machine should be turned on after troubleshooting.
  • 10.The guide rails should be cleaned regularly.
 Order Online
×
Ordering Product
  • Name:
  • Tel:
  • Email:
  • Company Name:
  • Message Time:
  • Message content:
  • Verification code:Click Refresh verification code