- Name : Automatic feeding cutting machine
- Model : UT1610/UT1810
Suitable for cloth, leather, plush material, synthetic fiber, paper and other non-metal flexible materials
Order Online
Application video
unique upper and lower smoke exhaust design, no matter breathable or non-breathable fabric cutting process of smoke and dust are completely eliminated, non-breathable material cutting to the production environment caused by pollution drawbacks completely solved.
adopts stainless steel caterpillar type feeding platform, equipped with automatic feeding machine independently designed by Youtuo (optional), which can realize non-interrupted automatic continuous processing after typesetting, automatic sealing of incision, smooth and without burr edge, and completely without manual intervention in the processing process.
Optional intelligent typesetting software, high material utilization rate.
According to product requirements, can be configured with double-headed laser, processing efficiency can be doubled
Y axis is driven by high power motor, cutting speed is faster
Optional air purification device, can realize the processing process of dust purification emissions
According to customer processing needs, can choose imported square rail, high-speed rail.
Customize models according to customers' actual needs
Rhyme: model
1410/1810
Cutting speed
0-40000.
Laser power
130.
House can control
0-100% software Settings
Our light type
Letter from type CO? Glass tube laser
Spun orange
+ / - 0.01
Cooling type
Forced swing ring water cooling
Repeat the roughness
1600-1000.
The power supply voltage
AC220V plus or minus 10% 50/60 hz
Work platform
Stainless steel belt working platform
The total power
< 1500
. - s.
PLL AI/DXF groan /DST, etc
The machine seal quantity
450
Female carved speed
0-60000.
The machine size
2260 * 1720 * 1050
Precautions
- 1.During the operation of the machine, the operator is strictly prohibited to leave to avoid fire.
- 2.After each startup, check whether the submersible pump is out of water. It is strictly forbidden to start working without the pump.
- 3.It is strictly forbidden to start the machine without grounding. The ground wire of the laser power supply must be connected to the ground, and must not be connected to doors, windows, water pipes and other facilities. The ground wire should be connected to the outdoor ground.
- 4.The water temperature of the water container must be controlled below 25 degrees. If the water temperature is too high, the circulating water should be replaced. It is best to use purified water for circulating water, and ensure that the water is clean and free of impurities. Replace the circulating water regularly.
- 5.Due to the laser and high voltage parts inside the machine, non-professionals are strictly prohibited from disassembling machine parts without authorization.
- 6.The fan must be turned on when engraving to avoid contaminating the lens and focusing lens. It is strictly prohibited to place flammable and explosive materials near the equipment to avoid fire.
- 7.It is strictly prohibited to use during thunderstorms.
- 8.It is strictly forbidden to plug or unplug the power cord and communication cable when the power is on.
- 9.During operation, abnormal phenomena such as no light output or collision of the coordinate system are found, and the power supply should be cut off first, and then the machine should be turned on after troubleshooting.
- 10.The guide rails should be cleaned regularly.
